LONGER B1 20W Basic Set
Stated work area: 450 × 440 mm
Outline is contained on both axes.
Start with your project
A flat part or sign
Start with the finished size and the process: cutting, surface marking or engraving.
Write the part before the machine.
- Record the material composition, coating and thickness.
- Record the finished width/depth and whether rotation is acceptable.
- Choose the result: a through-cut, a surface mark, depth engraving or coating removal.
- Separate one-off quality needs from production time, repeatability and operating costs.
A 420 × 400 mm planar example
The source-stated B1 work area is 450 × 440 mm. RAY5 areas are smaller on at least one axis. That narrows a dimension question; it does not establish material compatibility, clearance, clamping or an operating recipe.
| Configuration | Working area | Evidence |
|---|---|---|
| LONGER B1 20W Basic Set | 450 × 440 mm | Source · 2026-11-07 |
| LONGER B1 30W configuration reference | 450 × 440 mm | Source · 2026-11-07 |
| LONGER B1 40W configuration reference | 450 × 440 mm | Source · 2026-11-07 |
| LONGER RAY5 5W Basic Set | 400 × 400 mm | Source · 2026-11-07 |
| LONGER RAY5 10W configuration reference | 400 × 400 mm | Source · 2026-11-07 |
| LONGER RAY5 20W configuration reference | 400 × 365 mm | Source · 2026-11-07 |
A part outline against the stated area
Same scale, unrotated planar example: 420 × 400 mm. The solid surface is the source-stated work area; the dashed copper outline is the example part.
LONGER RAY5 20W configuration reference
Stated work area: 400 × 365 mm
Outline exceeds the stated area on at least one axis.
Original source-based diagram, not a machine image or tested fit. It excludes clamps, material suitability, access and operating clearances. No settings or installation approval follows.
Choose the next question.
Original project guides · Explain your project constraints · Browse exact machine references · Compare configurations · Setup tools · Learning paths